5. MILs and information lights 6. TC (OFF) rocker switch with light · For switching driving stability con

5. MILs and information lights 6. TC (OFF) rocker switch with light For switching driving stability control on Note and off. B = TC information light (see Page 45 -D 10) The rocker switch has one contact for switching off and another for switching on. A = TC MIL (see Page 45 -D 10) To switch off, press the "TC OFF"logo on the G = ABS MIL (see Page 45 -D 10) rocker switch.}This applies a positive voltage to the control module while the switch is pressed. This switches off driving-stabilitycontrol. Driving stability control cannot be switched Information light for TC (8) off during a TC control process (information -Lights for a lamp check when ignition is light on). switched on Whendriving stability control is off, the TC MIL Indicates control process (even when driving in the instrumentpanel and the indicator light in the rocker switch are lit. stability control is switched off). MIL for TC (A) To switch on driving stabilitycontrol, press the indicator light in the rocker switch. This applies-Lights in combinationwith the indicator light a positive voltage to the control module while in the rocker switch (TC OFF)for a lamp the switch is pressed. This switches on driving check when the ignition is switched on. stabilitycontrol. Driving-stabilitycontrol cannot be switched In combinationwith the indicator light in the back on during a TC control process rocker switch, indicates that driving stability (information light on). control is off. Driving stability control is ready for operation, Indicatesdefect: TC is out of order. i.e. is switched on automatically,whenever the engine is started. Lights together with the ABS MIL if there is an ABS fault. System description on Page 45 -D 8. MIL for ABS (G) -Lights up for a lamp check when ignition is switched on If the ABS MIL lights up with the engine running, the ABS has switched off due to a fault. 45 -D 12