7.6 Static test · The menu item Static test carries out an electrical check of the system (advancecheck). This t est can be

7.6 Static test The menu item Static test carries out an electrical check of the system (advancecheck). This t est can be carried out for exampleafter the hydraulic unit has been exchanged.Followthe instructions of the diagnos- tic tester. Test O.K., continuewith 7.7 7.7 Swaptest The Swap test is used to check the allocation of the brake pressure lines to the wheel brake cyl inders. A hydraulicand an electrical test are carried out. Followthe instructions of the diagnostic tester. 7.8 Identification Checkingthe installedcontrolmodule Note: The allocation of the part numbercan be taken from the correspondingParts Catalogue. The following blocks are displayedafter actuating the Info key F8. Content of the blocks: Block 1: controlmoduleidentification Block 2: softwareversion 45 -D 102