Test Work instruction Result Possible causes of fault · 103 Test: short to ground/

Test Work instruction Result Possible causes of fault 103 Test: short to ground/ Greater No: open circuit in signal circuit than 11 V -Short circuit to ground or open circuit between: .Brake pedal actuated PSMcontrol module .Measure voltage betweenthe wiring harnessplug (wiring harness side) following terminals: terminal 48 PSM control module and wiring harnessplug (wiring harness iplug connectionX 1/3 side)terminal 48 terminal 5 and and ground stop light switch terminal 2 or -Stop light switch faulty Note: The plug connection X 1/3 (terminal 5) and the jumper plug 6/2 are located in the wiring harness. Check the wiring harness for pinching or chafing Yes: 104 sJ~mae:e. ITO4 voltage short in signal circuit Less than No: 0.3 V -Short circuit to voltage between: Brake pedal not actuated PSM control module wiring harness plugI .Measure voltage betweenthe (wiring harness side) terminal 48 following terminals: iandI PSM control module wiring harness stop light switch terminal 2 plug (wiring harness side) terminal 48 or and -Stop light switch faulty ground Note: The plug connection X 1/3 (terminal 5) and the jumper plug 6/2 are located in the wiring harness. Checkthe wiring harnessfor pinchingor chafing~ge. !Yes:EO! - I EO! 1-PSMcontrolmod~lefaulty; I 45 -D 116 ITest:I.