fullymatted.
Back to search
996 Carrera Group 0 Part 1 Diagnosis / PAGE 183

PSM diagnosis 911 Carrera 4 (996) · 8.7 Front right wheel-speedsensor circuit

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 183
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

PSM diagnosis 911 Carrera 4 (996) 8.7 Front right wheel-speedsensor circuit Test Work instruction Result Possible causes of fault Test: voltage short in signal circuit Less than No: 0.3 V -Short circuit to voltage in the circuit .Ignition off between: .Pull wiring harness plug off of: PSM control modulewiring harness plug PSM control module (wiring harness side) terminals 15, 16 .Ignition on and .Measure voltage betweenthe plug connectionX 1/4 following terminals: terminals16, 17 PSM control module wiring harness and plug terminal 15 front right speed sensor and terminals 5, 4 ground Note: Disconnectthe plug connection X 1/4 (terminals16, 17) for further troubleshooting.The connectionpoints 143 and 144 are located in the wiring harness.Check the wiring harnessfor Yes: T02 l?1nffiineor chafine~ge. TO2 Test: short to ground in signal Greater No: circuit than 500 -Short circuit to ground in the circuit kOhm between:iPSM .Ignition off control module wiring harness plug .Measure resistance betweenthe (wiring harness side) terminals 15, 16 following terminals: and PSM control module wiring harness plug connection X 1/4 plug (wiring harness side) terminal 15 terminals 16, 17 and and ground front right speed sensor terminals 5, 4 Note: Disconnect the plug connection X 1/4 (terminals 14, 15) for further troubleshooting. The connection points 143 and 144 are located in the wiring!harness. Check the wiring harness forl~ing IYes: TO3 or chafing damage. TO! 45 -D 120

This is a source reference. Confirm exact model applicability in the original material.