996 Carrera Group 0 Part 1 Diagnosis / PAGE 201
PSM diagnosis 911 Carrera 4 (996) · Test Work instruction Result Possible
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
PSM diagnosis 911 Carrera 4 (996)
Test Work instruction Result Possible causes of fault
short to ground in signal Greater,than No:
circuit 500 -Short circuit to ground between:
kOhm PSMcontrol module
I- Ignition off wiring harnessplug (wiring harness side)
-Measure resistance betweenthe terminal 24
following terminals: and
PSM control module PSM booster pump
wiring harnessplug (wiring harness wiring harnessplug (wiring harness side)
side)terminal 24 terminal 1
and
ground [Note: Check the wiring harnessfor
Yes: 104 pjnchingor chafingdamage.
104 Test: voltage short in signal circuit Less than
0.3 V Short circuit to voltage between:
.Ignition on PSMcontrol modulewiring harnessplug
.Measure voltage betweenthe (wiring harness side) terminal 22
following terminals: and
PSM control module PSMbooster pump
wiring harnessplug (wiring harness terminal 2
side)terminal 22
and Note: Check the wiring harness for
round Yes:105 pinching or chafin!! damage.
Test: short to ground in signal Greater No:
circuit than 500 -Short circuit to ground between:
kOhm PSMcontrol module
.Ignition off wiring harness plug (wiring harness side)
.Measure resistance between the terminal 22
following terminals: and
iPSM control module PSM booster pump
wiring harness plug (wiring harness wiring harnessplug (wiring harness side)
side) terminal 22 terminal 2
and
ground Note: Checkthe wiring harnessfor
IYes: T06 pinchingor chafing damage.
45 -D 138IITest:1103INo:1105
This is a source reference. Confirm exact model applicability in the original material.
