fullymatted.
Back to search
996 Carrera Group 0 Part 1 Diagnosis / PAGE 213

PSM diagnosis 911 Carrera 4 (996) · 8.19 Rear right inlet solenoid valve circuit

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 213
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

PSM diagnosis 911 Carrera 4 (996) 8.19 Rear right inlet solenoid valve circuit Test Work instruction Result Possible causes of fault TOl Test: voltage short in signal circuit Less than No: 0.3 V -Short circuit to voltage between: .Ignition off PSM control module .Pull wiring harness plug off of: wiring harness plug (wiring harness PSM control module side) and terminal 6 PSM hydraulic unit and .Ignition on PSM hydraulic unit .Measure voltage betweenthe wiring harness plug (wiring harness following terminals: 'side) PSM control module terminal 3 wiring harnessplug (wiring harness side) terminal 6 Note: Check the wiring harness for and pinching or chafing damage. !ground i Yes: 102 102 Test: short to ground in signal Greater No: circuit than 500 -Short circuit to ground between: kOhm PSM control module .Ignition off wiring harness plug (wiring harness side) .Measure resistance betweenthe terminal 6 following terminals: and PSM control module PSM hydraulic unit wiring harness plug (wiring harness wiring harness plug (wiring harness side) side)terminal 6 terminal 3 and ground Note: Check the wiring harnessfor ~Yes:TO3 pinchingor chafing damage. 45 -D 150

This is a source reference. Confirm exact model applicability in the original material.