Test Work instruction Result Possible causes of fault · TO3 Test: Open circuit in signal circui

Test Work instruction Result Possible causes of fault TO3 Test: Open circuit in signal circuit _ess than No: -) Ohm -Open circuit between: .Pull wiring harness plug off of: steering-anglesensor wiring harness PSM control module plug (wiring harnessside)terminal 2 .Measure resistance betweenthe and following terminals: PSMcontrol module steering-anglesensor wiring harnessplug (wiring harness side) wiring harness plug (wiring harness terminal61 side) terminal 2 and Note: The plug connection X1/4 PSM control module (terminal 9) and the connection point wiring harness plug (wiring harness 136 are located in the wiring harness. side)terminal 61 Check the wiring harness for pinching or Yes: 104 chafing d9~g~, TO4 open circuit in signal circuit Less than 5 Ohm -Open circuit between: .Measure resistance betweenthe steering-anglesensor following terminals: wiring harnessplug (wiring harness side) steering-anglesensor wiring harness terminal 1 plug (wiring harness side) terminal 1 and andIPSM PSMcontrol module control module wiring harnessI wiring harnessplug (wiring harness side) plug (wiring harness side) terminal 63 terminal 63 Note: The plug connection X1/4 (terminal 10) and the connection point 135 are located in the wiring harness. Check the wiring harness for pinching or Yes: E01 chafing dama~e. EO! -Steering-angle sensor faulty or -PSM control module faulty 45 -D 168 I!No:Test: