996 Carrera Group 0 Part 1 Diagnosis / PAGE 235
PSM diagnosis 911 Carrera 4 (996) · 8.29 Pressure sensor circuit
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
PSM diagnosis 911 Carrera 4 (996)
8.29 Pressure sensor circuit
Test Work instruction Result Possible causes of fault
T01 Test: short to ground/ open circuit approx. 5 V No:
in power supply circuit -Display 0 V:
Short circuit to ground/open circuit in
Ignition off circuit between:
Pull wiring harness plug off of: PSMcontrol module
wiring harnessplug (wiring harness Pressure sensor
.Ignition on side)terminal 69
.Measure voltage betweenthe and
following terminals: pressure sensor
wiring harnessplug (wiring harness pressure sensor
wiring harnessplug (wiring harness side)terminal 3
side)terminal 3
-Display greater than 11 V: and
Short circuit to voltage between: ground
PSMcontrol module
wiring harnessplug (wiring harness
side)terminal 69
and
pressure sensor
wiring harnessplug (wiring harness
side)terminal 3
or
Yes:102 -~M control mod~ faulty
102 open circuit in ground circuit approx.5 V No:
-Open circuit in circuit between:
.Measure voltage betweenthe PSMcontrol module
wiring harnessplug (wiring harnessside) following terminals:
pressure sensor terminal 67
wiring harnessplug (wiring harness and
pressure sensor side)terminal 3
wiring harness plug (wiring harness side) and
terminal 1 pressure sensor
wiring harnessplug (wiring harness or
side)~rminal 1 Yes: TO3 -PSM co-Okolmodule faulty
45 -D 172
iTest:!.
This is a source reference. Confirm exact model applicability in the original material.
