996 Carrera Group 0 Part 1 Diagnosis / PAGE 237
PSM diagnosis 911 Carrera 4 (996) · 8.30 Battery charge circuit
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
PSM diagnosis 911 Carrera 4 (996)
8.30 Battery charge circuit
Test Work instruction Result Possible causes of fault
TOI Test: voltage short in signal circuit [Less than No:
1.5 V -Short circuit to voltage between:
.Ignition off PSMcontrol module
.Pull wiring harnessplug off of: wiring harnessplug (wiring harness
PSM control module side)terminal 38
.Ignition on and
.Measure voltage betweenthe generator terminal L
following terminals: ,and
PSM control module instrumentcluster
wiring harness plug (wiring harness wiring harnessplug (wiring harness
side)terminal 38 side)terminal 11/3
and or
ground -generator faulty
Note: The plug connection X 1/3
(terminal 6), connection point 39, plug
connection X 2/3 (terminal 5) and plug
connection X 59/1 (terminal 12) are
located in the wiring harness. Check the
wiring harness for pinching or chafing
Ires: TO2 damage.
45 -D 174
This is a source reference. Confirm exact model applicability in the original material.
