PSM diagnosis 911 Carrera (996) · 7.7 Static test

PSM diagnosis 911 Carrera (996) 7.7 Static test This test involves carrying out the valve and pump motor test. The test is normally not started until the vehicle moves off. The valve and pump motor test includesactuating all ABS valves and the pump motor, and checking their feedback. It only makes sense to carry out the .Static test" function if no fault has previouslybeen detected as present, i.e. the system has not switched off. This test can be carried out for example after the hydraulic unit has been exchanged. Followthe instructions of the diagnostic tester. Test O.K., continue with 7.8 7.8 Swap test The Swap test is used to check the allocation of the brake pressure lines to the wheel brake cylinders. A hydraulic and an electrical test are carried out. Followthe instructions of the diagnostic tester. 7.9 Bleed The brake system can be bled using this menuitem. Refer to the Technical Manual,Group 47, Service No. 4701 07. 7.10 Extractcoding The following items are displayed under this menu item: Steer.-angle sensor calib. by: xxxxxxx Version coded by: xxxxxxx (The workshop number from the diagnosis card is stored.) Veh. Ident. No. xxxxxxxxxxxxxxx Transmission: Manual transmissionjTiptronic 45 -D 228