fullymatted.
Back to search
996 Carrera Group 0 Part 1 Diagnosis / PAGE 308

8.7 Front right wheel-speed sensor circuit · Test Work instruction Result Possible causes of fault

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 308
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) PSM diagnosis 8.7 Front right wheel-speed sensor circuit Test Work instruction Result Possible causes of fault T01 Test: voltage short in signal circuit Lessthan No: 0.3 V -Short circuit to voltage in the circuit .Ignition off between:I .Pull wiring harnessplug off of: PSM control module wiring harness plug PSM control module i (wiring harness side) terminals 15, 16 .Ignition on!. and Measure voltage betweenthe front right speed sensor following terminals: terminals 4, 5 PSM control module wiring harness plug (wiring harness Note: The connection points 143 and side) terminal 16 144 are located in the wiring harness. and Check the wiring harnessfor pinchingor ground Yes:T02 chafing damage. ITO2 Test: short to ground in signal Greater No: circuit than 500 -Short circuit to ground in the circuit kOhm between: .Ignition off PSM control module wiring harnessplug .Measure resistance between the (wiring harness side) terminals 15, 16 following terminals: and PSM control module wiring harness front right speed sensor plug (wiring harness side) terminal 16 terminals 4, 5 and ground Note: The connection points 143 and 144 are located in the wiring harness. Check the wiring harnessfor pinchingor IYes: 103 chafing dama2e. 45 -D 245

This is a source reference. Confirm exact model applicability in the original material.