Nominal values · With the ignition switched on

Nominal values With the ignition switched on Supply voltage 11.5 to 13.5 volts Pot. 1, convertible top The values between pot. 1, calibration value 1, and pot. I, calibration value 6, are calculated as percentage by the convertible-topcontrol module. If the actual values (measured values) of calibration values 1 and 6 differ, the convertible-top potentiometer must be replaced. Refer to ServoNo. 616619 -Pot. 1 calibration value 1 Tester display must be smaller than < 1.6 volts -Pot. 1 calibration value 2 -Pot. 1 calibration value 3 -Pot. 1 calibration value 4 -Pot. 1 calibration value 5 -Pot. 1 calibration value 6 Tester display must be greater than> 3.0 volts Voltage measurement of convertible-top potentiometer Switch on the ignition and measure voltage with test adapters 9619 and 9636 and the pin template 9636 and measure row 1, pins 12 and 21, with the voltmeter. Nominal value 0.4 -4.4 volts. Pot. 2, convertible-top compartment lid The values between pot. 2, calibration value 1, and pot. 2, calibration value 4, are calculated as percentage by the convertible-topcontrol module. If the actual values (measured values)of calibration values 1 and 4 differ, the CTCL potentiometer must be adjusted. Refer to ServoNo. 61 70 19 -Pot. 2 calibration value 1 Tester display must be greater than> 1.0 volts -Pot. 2 calibration value 2 -Pot. 2 calibration value 3 -Pot. 2 calibration value 4 Tester display must be smaller than < 3.9 volts Voltage measurement of convertible-top compartment potentiometer Switch on the ignition and measurevoltage with test adapters 9619 and 9636 and the pin template 9636 and measure row 3, pins 1 and 3, with the voltmeter. Nominalvalue 0.5 -4.4 volts. 61 01 Diagnosis/troubleshooting, convertible top 61 -D 13 Printed in Germany -11, 1998 99661Dl