996 Carrera Group 0 Part 2 Diagnosis / PAGE 55
Roll-over protection system diagnosis 911 Carrera (996) · 2. The control module 3. Ele
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Roll-over protection system diagnosis 911 Carrera (996)
2. The control module 3. Electrical plug connection
of the roll-over bar
The control module consists of:
The plug connectionsare situated on the rear
A g-sensor (g = gravitation),which detects side of the roll-overbar. Before connecting and
loss of contact with the road surface disconnectingthe plug connection,first unscrew
the six fastening screws of the roll-overbars.
Two level sensors, which detect the vehicle
4. Warnins light of roll-over inclination,transverse and longitudinal
protection system acceleration
After the ignition has been switched on,
Evaluationelectronics with self-diagnosis the warning light lights up for five seconds
In the event of a fault, the warning light briefly Capacitors to provide reserve power
goes out and then comes back on continuously. if the battery voltage fails.
Note
The warning light also lights up if the transport
lock has been activated via the diagnostic
module.
231_98
1. Level sensors
2. g-sensor
3. Evaluationelectronics
4. Capacitors
69 -D 30 69 71 Diagnosis/troubleshooting, roll-over protection system
99669D23 Printed in Germany -11, 1998
This is a source reference. Confirm exact model applicability in the original material.
