Fault, fault code Possible causes, elimination, notes · 3. Clear the fault memory.

Fault, fault code Possible causes, elimination, notes 3. Clear the fault memory. 4. Check whether the fault appears again. a) If the fault does not appear again, replace the passenger'sairbag unit. b) If the fault appears again, check the wiring harnessfor pinches and chafing damage. c) If no fault is found on the wiring harness,replace the triggering unit. Proceedas described belowto determinewhetherthe fault was eliminated: 1. Clear the fault memory. 2. Switch off ignition. 3. Removeignition key. 4. Switch on ignition. Test point 3 Supply voltage 1. Inspectthe battery and generator. Fault code 03 2. Inspectthe plug connectionon the triggering unit for corrosion. Note The warning light is on as long as the limit value is exceeded or not reached. Test point 4 Airbag warning light 1. Inspectthe fuse for the supply voltage (terminal 15) for the instru- Fault codes 01, 02 ment cluster. 2. Inspectthe bulb and replace it if necessary. 3. Inspectthe lead from the triggering unit pin 7 to the warning light for continuityand short circuit to positive. 8 69 01 Diagnosis/troubleshooting, airbag 69 -D 59 Printed in Germany -12, 1998 99669D45