Function of individual components · [1]- Parking aid Longitudinaldirection

Function of individual components [1]- Parking aid Longitudinaldirection When reverse gear is engaged, the Upper lumbar corresponding rearview mirror (right-hand drive or left-handdrive according to coding) Lower lumbar is lowered by the angle stored. Manual adjustment of the seatmotors is carried Whenthe desired positions have been found and out parallel to the lowering of the rearview stored by means of the switch for memory seat mirror. Automatic adjustmentinterrupts the adjustment, they can be called up at the push of lowering procedure. If reverse gear is still a button when required. engaged after automatic adjustmentis complete, the rearview mirror is lowered [5]- Control module again. The control module is fastened under the front [2]- Rearview mirrors seat (driver's side) with two screws. There is a total of 10 connection points on the control Manual adjustment of both rearview mirrors is module. carried out with the switch for rearview mirrors or changeoverswitch for rearview mirrors. [6]- Switch for memory seat adjustment Whenthe desired positions have been adjusted These switches [M, 1, 2, 3] can be used to and stored by means of the switch for memory store or call up the optimum positions once seat adjustment,automatic adjustment of the they have been found. The systems enables rearview mirrors is carried out by actuating adjustmentvaluesfor three persons to be the corresponding switch (1, 2 or 3) stored. [3]- Support with transmission The support with transmission consists of the following components: Two electric motors with a potentiometer Transmission [4]- Front seat The following are the possibilities for adjusting the front seat: Backrest Front height Rear height 72 -D 8 7298 Diagnosis/troubleshooting, seat memory (System SOl) 99672D1 Printed in Germany -25, 1999.