Connector overview · Plugs on control module

911 Carrera (996) Seat memory diagnosis Connector overview Plugs on control module Plug Nos. 1 to 4 The plugs each consist of two individualplugs which are clipped together (Figure 134_99). The 2-pole plug is intended for the load circuit (motor). The 3-pole plug is the signal circuit connection (Hall-effectsensor). When they are clipped together, plug nos. 1 to 4 each have 5 poles. 132_99 See the 3-pole plug in Figure 133_99 for pin assignment.The pin numbers are printed on the side of the plugs. Plug No.6 The plug consists of three individualplugs which are clipped together (Figure 133_99). Two individualplugs have 3 poles each, the third has 2 poles. When it is clipped together, plug no. 6 has 8 poles. 134_99 Plug No.5 The plug consists of three individualplugs which are clipped together (Figure 132_99), Each individualplug has 3 poles. When it is clipped together, plug no. 5 has 9 poles. Sequence of the individual plugs The sequence of the individualplugs from left to right is as follows: natural blue black 133_99 72 98 Diagnosis/troubleshooting, seat memory (System SOl) 72 -D 13 Printed in Germany -25, 1999 99672D1