Group 0 · General / PAGE 217
2470 ME 7.8 Motronic engine manage- 2470 New diagnosis facilities of ME 7.8 · ment system
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Fuel and ignition system 2
2470 ME 7.8 Motronic engine manage- 2470 New diagnosis facilities of ME 7.8
ment system Motronic
As of model year 2002, the 911 Carrera is ? Compared to ME 7.2, the ME 7.8 Mo-
fitted with ME 7.8 Motronic. This Motronic tronic as of software version 12.0 of the
is derived from the 911 Turbo (996) and Porsche System Tester 2, extended di-
adapted to the engine-specific require- agnosis facilities can by used.
ments (without boost pressure control). ? To protect the converter on vehicles
with Tiptronic, the engine speed with
vehicle stationary is restricted to ap-
prox. 4000 rpm.
Actual values:
? When directly entering the actual val-
ues, only a reduced number of actual
values are displayed.
? The full range of actual values can be
read out via the "Filter" soft key and "All
Actual Values".
? The filters can also be selected ac-
cording to systems or functions, or in-
dividual ones can be created via "New"
2_11_01 filter.
The ME 7.8 provides the following new
System checkfunctions and components
? Valve stroke control, shorter stroke:? Extended diagnosis facilities of the Mo-
Unlike on the 911 Turbo (996), with tronic management system
this vehicle the check must be carried? On-board diagnosis (wordwide)
out in a workshop, in accordance with? Actuation of continuous closed-loop
instructions of the Porsche System position control of intake camshafts
Tester 2.? VarioCam Plus control (valve stroke)
? Valve stroke control, longer stroke:? Modified Hall sensor signal
As on the 911 Turbo (996), this test is? Oxygen sensor, LSF
carried out during a test drive in accor-? Modified hot film air mass flow sensor
dance with instructions of the Porsche HFM-5
System Tester 2.? Injection valves EV-6
? Non-return fuel supply system
Actuator activated
? Valve stroke control, cylinder bank 1
and 2:
In this test, the engine speed must be
increased to a value which will be regis-
tered on the tester, otherwise the e n-
gine will stall.
2002 Service Information 2 - 5
This is a source reference. Confirm exact model applicability in the original material.
