996 Carrera Group 0 Part 2 Diagnosis / PAGE 149
Heating diagnosis 911 Carrera (996) · Fault, Fault code Possible causes, elimination, notes
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Heating diagnosis 911 Carrera (996)
Fault, Fault code Possible causes, elimination, notes
Test point 3
Interior temperature sensor Diagnosis conditions
No control module fault stored.
Open circuit No fault with supplyvoltage (5 volts),
Short to ground Outsidetemperature higher than -40 °C.
Fault code 22
Open circuit
1. Unplug connector A from the heatingjair-conditioningcontrol.
2. Connectohmmeter to connectors A 10 and A 12.
Display: approx. 3 k.o. at 23 DC
Note
The wires to the interior temperature sensor are routed via two
additional plug connectionson the heating/air-conditioningcontrol.
3. Unplug connector from the interior temperature sensor.
4. Connectohmmeterto connectorA 10 and interiorsensor
connectorpin 5.
Display: < 5 .Q
5. Connectohmmeter to connector A 12 and interior sensor
connector pin 4.
Display: < 5 .0.
6. Connectvoltmeter to connector A 10 and ground,
Switch on ignition.
Display: 0 volts
If approx. 5 volts are displayed,check wiring harness for pinching
and chafingdamage.
80 -D 18 80 01 Diagnosis/troubleshooting, heating
99680Dl Printed in Germany -11, 1998
This is a source reference. Confirm exact model applicability in the original material.
