Alarm system diagnosis 911 Carrera (996) · If a control command is issued via the handheld Radio remote control

Alarm system diagnosis 911 Carrera (996) If a control command is issued via the handheld Radio remote control transmitter, this is confirmed with displaytype 4 If a command is issued via the handheld for the duration of the operation. This display transmitterI this is acknowledgedwith has priority. displaytype 4 at the alarm readiness displayfor the duration of the operation.Alarm triggering and alarm output The alarm functions can be triggered only Commandstriggered and correctly executed in the primed state. via the handheldtransmitter are acknowledged A non-blockedalarm input triggers an alarm as follows at the output for the direction in the primed state with an active signal. indicator lights: The alarm-triggeringinput then remains blocked for further alarm triggering until Securewith signal2 it returns to the inactive state. Then,following expiry of the inactive period of 10 seconds, Lockwith signal3 it is again included in the alarm evaluation, provided that it was inactive for the entire Unlock with signal 1 inactive period. Dependingon the countryI the checkback signal In a priming cycle, the inputs Passenger can be programmed via the Porsche System compartment monitorI External 1 and Tester 2. External 2 trigger a maximum of three alarms. All other functions such as interior light control are controlled in the same way as with The alarm output is via: the vehicle key. Horn depending on the country If operating commands are simultaneously present from the handheldtransmitter and coding the door lock barrels, the signal recognised Horn depending on the country first has priority. coding Interiorlights asynchronouswith the direction indicator lights, depending on the country coding The alarm output with all associated actions is interrupted immediatelyin the event of deactivation. 8 Diagnosis/troubleshooting, alarm system