996 Carrera Group 0 Part 2 Diagnosis / PAGE 203
Alarm system diagnosis 911 Carrera (996) · Test point 15
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Alarm system diagnosis 911 Carrera (996)
Test point 15
Control module faulty Replacealarm control module.
Fault code 15
Test point 16
Signal from the airbag 1. Pulloff plugI on the alarmcontrolmodule.
Short to B+ 2. Unplugthe DME(ECM)connector.
Fault code 16
3. Pull off the airbag control module plug.
4. Voltmeter at alarm control module plug I pin 33 and ground.
Display:0 Volt
5. If no fault can be detected on the wiring harness, reattach the plug
to the alarm control module and the airbag control module.
6. Switch on the ignition and clear the fault memory of the alarm
system.
If the fault no longer occurs, the DME control module is faulty.
If the fault occurs again, detach the plug on the airbag control module.
7. Clear the fault memory of the airbag system.
If the fault no longer occurs, the airbag control module is faulty.
If the fault occurs again, the alarm system control module is faulty.
Test point 17
Signal from airbag 1. Pull off plug I on the alarm control module.
Short to B+ 2. Unplugthe DME(ECM)connector.
Fault code 17
3. Pull off the airbag control module plug.
4. Voltmeter at alarm control module plug I pin 33 and positive.
Display:0 Volt
This is a source reference. Confirm exact model applicability in the original material.
