Ohmmeter at alarm system control module plug I pin 3 and ground · Ohmmeter display: 00.Q

911 Carrera (996) Alarm system diagnosis Ohmmeter at alarm system control module plug I pin 3 and ground Ohmmeter display: 00.Q Ohmmeter at alarm system control module plug I pin 3 and signal converter plug pin 8 Ohmmeter display: < 5 Q If no faults are detected in the wire, replace the signal converter. Test point 42 Releaseon passenger's side This fault is stored if the safe drive motor cannot be actuated,the safe jams contact (microswitch)is not connectedto ground after release, or the Fault code 43 alarm system control module is coded incorrectly (country coding). 1. Checkthe countrycodingin the menuitem Coding 2. Select (Drive links) "Securedoors" with PST 2, and check whether the drive motors react. If the drive motors react, select "Driver's side secured"and "Passenger'sside secured"in the menu item Input signals,and close the doors. Vehicle not secured PST2 display Driver's side not secured Passenger'sside not secured If the display of the PST2 deviatesfrom this information or if the drive motor does not react, a fault is present in the supply lead or in the door lock (microswitch,drive motor). Pull plugs I and II off the control module Pull plug off door lock on passenger's side Voltmeter at alarm system control module plug II pin 3 and ground Voltmeter display: 0 V 90 -D 45