Priming status memory · The alarm-triggering components that are in the Functionindicator

911 Carrera (996) Alarm system diagnosis Priming status memory The alarm-triggering components that are in the Functionindicator non-active state during priming and that are therefore blocked for alarm triggering are Control, external output stored in the priming status memory. The priming type also is saved. Alarm horn Direction indicator lights, lefVright External outputDrive links NoteWith this menu item, it is possible to activate drive links of the alarm system using the The radio unit or the PCM operator control unitPorsche System Tester 2. This allows the are connectedto an auxiliaryframe by the Radiofunction of the drive links to be assessed very contact. The radio contact area on the radio unit quickly. or PCMoperator control unit has an insulating strip. If this insulatingstrip wears through theThe following drive links can be actuated: contact tab, ground contact can occur. In the case of maintainedcontact no alarm is Comfort closing triggered. This is because all active inputs (ground connection)are blocked when activated Comfort opening to trigger an alarm. In the case of a loose Power window control contact, an alarm may be triggered. Under the menu item Events,the PST 2 can be used to Indicator, door locked read out the cause of the alarm being triggered. Under the menu item Input signals,the status of Lockingclosed the radio contact can be read out. Lockingopen Tank cap closed Tank cap open Interior light Loaddisconnection Luggage compartment, rear