PCM Switch on the PCMwith a free panoramic · -The PCM reverts to the Code function

PCM Switch on the PCMwith a free panoramic -The PCM reverts to the Code function when view for approx. 20 minutes (to load GPS the battery is disconnected and is thus no almanac). longer ready for operation. The date and time are also adopted once Whenthe power supply is disconnected,the the GPSalmanac has been loaded; it may be built-inGPS receiver loses the so-called necessaryto change over to summer time almanac containing the satellite orbital paths. (daylight-savingtime). This time is transferred to the instrumentcluster. If the time is then The date and time are no longer displayed manuallychanged by means of the on the display after the power supply is instrument cluster, this time is adopted by disconnected. the PCM and synchronisedwith GPStime. If the telephone card was inserted and the The stored stations are displayed again telephone was ready for operation,the when station buttons 1 to 6 are pressed telephone is subsequentlydisabled. The telephone is enabled again when the telephonePIN code is entered with the SIM Remedy telephonecard inserted. Input the PCM code. If the code card is unavailable,the PCM code can also be read from the DME control module (under "Vehicle data"). This code is also availablefrom the Porsche IPAS. 90 -D 798.