If no faults are detected in the wire, replace the motor for the rear · Test point 14

If no faults are detected in the wire, replace the motor for the rear spoiler Test point 14 Washerfluid level Ignition on Engine off PST2display: OK Check washer fluid level Switch off ignition Washerfluid level full Pull off plug on sensor for fluid level display Ohmmeter directly on sensor for fluid level display, pin 1 and pin 2 Ohmmeterdisplay: < 5 .0. If not, replacesensorfor fluid leveldisplay. Ohmmeteron plug of sensor for fluid level display pin 2 and ground Ohmmeterdisplay: <5.0. Pull off plug II on the instrument cluster Ohmmeteron instrumentcluster plug II pin 26 and plug on sensor for fluid level display, pin 1 Ohmmeterdisplay: < 5 .0. See also Drive links chapter, "Washerfluid warning light' 90 25 DiagnosisjTroubleshooting, instrument cluster 90 -D 118