In the PST2menu item Actual values, select Sensor voltage,spring · Connect a jumper to terminals 4 and 5 of the sensor plug

911 Carrera (996) HBA diagnosis In the PST2menu item Actual values, select Sensor voltage,spring travell Connect a jumper to terminals 4 and 5 of the sensor plug PST2 display approx. 5 V If no fault is detected in the wires or control module, replace the angle sensor for HBA, front. If fault code 5 reappearsafter the plug has been removed from the angle sensor for HBA, front, there is a fault in the supply lead to the angle sensor for HBA,rear. Proceed as follows in this case: Pull plug off the angle sensor for HBA,rear Measurevoltage betweenterminal 5 of the sensor plug and ground Voltmeter display approx. 5 V Measurevoltage betweenterminal 5 and terminal 1 of the sensor plug Voltmeter display approx. 5 V In the PST2menu item Actual values, select Sensor voltage,spring travel 2 Connecta jumper to terminals 4 and 5 of the sensor plug PST2 display approx.5 V If no fault is detected in the wires or control module, replace the angle sensor for HBA, rear. 94 92 Diagnosis/troubleshooting HBA 94 -D 19