996 Carrera Group 2 Fuel, Exhaust, Engine Electronics / PAGE 17
Fuel supply, control 911 Carrera (996) · Installing filler neck
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Fuel supply, control 911 Carrera (996)
Installing filler neck
No. Procedure Instructions
4 + 5 Close the surge flap Close the surge flap before fitting the filler neck,
Engage surge flap at the locking lug.
6 Filler neck To facilitate installation,apply a thin coat of engine oil
on the indicated area (arrow).
7 Fit filler neck Carefullypush the filler neck into take-up flange on the fuel
tank. Turn the filler neck anticlockwise by approx. 45°.
Fit fuel lines and ground strap Fit seal in correct position.
Ensure that the locking tabs are seated correctly. Fasten
the hexagon-headbolt. Coat seat of the cap seal with
Vaseline.
20 -14 20 07 19 Removing and installing filler neck
9962011 Printed in Germany -21, 1999
This is a source reference. Confirm exact model applicability in the original material.