fullymatted.
Back to search
996 Carrera Group 2 Fuel, Exhaust, Engine Electronics / PAGE 22

No. Procedure Instructions · 4 Detach coolant lines Removefront wheels. Open spring ba

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 22
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Fuel supply, control No. Procedure Instructions 4 Detach coolant lines Removefront wheels. Open spring band clamps on both sides and pull off the coolant lines. Remove underbody covers. Removeall coolant lines. 5 Detach restraining straps Removediagonal braces between body and side members on the fuel tank Detach restraining straps. Removebottom guard of fuel tank and the restraining straps. 6 + 7 Detachfiller neck Removecap. Undohexagorrheadbolt. Unclipseal. 8 Detach fuel lines and Pressreleasebuttonsand simultaneouslypullthe lines ground strap apart.Pulloff the groundstrap. 9 Removefiller neck Turn the filler neck clockwise by approx. 450 and pull out carefully. The open surge flap must not be damagedwhen pulling out the filler neck. Close the opening in the fuel tank, e.g. with the cap of a spray can (/35 cm). 10 Removeconnectionson Disconnectfuel lines and electrical plug connection, the fuel levelsensor To do this: press the release button on the fuel lines and pull off the fuel lines. press the release button on the electrical plug connection and disconnectthe plug connection. 11 Lock the steeringwheel 12 Detach the universal joint Move steering wheel to centre position and lock it with the steering wheel holder. Loosen universaljoint (steering shaft) at steering gear. Take out the clamping screw and push the universaljoint upwards. 20 10 19 Removing and installing fuel tank 20 -19 Printed in Germany -21, 1999 9962015

This is a source reference. Confirm exact model applicability in the original material.