996 Carrera Group 2 Fuel, Exhaust, Engine Electronics / PAGE 30
Disassembling and assembling fuel ring pipe · No. Designation Qty. Removal Installation
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Fuel system -Electronic injection
Disassembling and assembling fuel ring pipe
Note:
No. Designation Qty. Removal Installation
1 Protective sheath 1
2 Pipe 4 x 1 (420 mm long)
3 Clamp 1 Ensure correct seating
4 Pressure regulator 1
5 a-ring 1 Replace
6 a-ring 1 Replace
7 Closure cap 1 Note
The seal or sealing ring in
the closure cap is not
exchangeable.It must
therefore be used only
once.
Tighteningtorque:
2.5 :to.5 Nm
(2.0 :to.5 ftlb.)
(Wrenchsize 13 mm)
8 Valve 1 Unscrewusing a Screw in using a
commerciallyavailable commerciallyavailable
valve tool valve tool
9 Cable retainer 3
10 Hexagon-headbolt 4
11 Fuelring pipe 1
12 Clamp 6 Ensure correct seating
13 Injectionvalve 6
14 a-ring 6 Replace
15 Hexagorrhead bolt
16 Fasteningclamp
24 30 37 Disassembling and assembling fuel ring pipe 24 -3
Printed in Germany -28, 1999 996241
This is a source reference. Confirm exact model applicability in the original material.