Installation · 1. Fasten B+ lead and install three-phase

Installation 1. Fasten B+ lead and install three-phase generator. 2. Installdeflectionroller and fit drivebelt. Tightening torques: Hexagon nut a/t 24 M16 x 1.5 65::t5Nrn (48::t 3.5 ftlb.) Hexagon-headbolts MID 46 Nm (34 ftlb.) Hexagonnut aft 13 M8 15 Nm (11 ftlb.) Deflection roller a/t 17 MID 46 Nm (34 ftlb.) 3. Install air flow sensor with air cleaner assemblyand connect battery. Perform a function test. Undoing and tightening the belt pulley Note The belt pulley can be undone and tightened using a standard commercially availabletool, Tools: double offset ring wrench aff 24, screwdriver insert for screw with internal serrations aff 10, cross handle and torque wrench. The hexagon nut a/f 24 must be countered with the ring wrench during tightening. The shaft is tightened to the prescribed tightening torque of 65 :t 5 Nm (48 :t 3.5 ftlb.) using the screwdriver insert and the torque wrench. 27 -10 272219 Removing and installing three-phase generator -GT3 GT3277 Printed in Germany -25, 1999