5. Undo fastening screws on the reservoir (two · M8 screws) and four screws (three M8 screws

911 Carrera (996) Starter, power supply, cruise control 5. Undo fastening screws on the reservoir (two M8 screws) and four screws (three M8 screws and one M6 screw) on the hydraulicpump. Pull the expansiontank with hydraulicpump and connected lines up out of the fastening bracket and lay aside to the right-handside. 427_99 8. Removecompressor from the bracket for the generator. Unscrewthe three screws for this purpose. The throttle body can be swung upward for better accessibilityto the front screw. To do this, the two inner hose clamps must be removed. 059_99 6. Removeholder for oil filter bracket. Unscrew the M6 screw and undo the M8 screw for this ~ purpose. Lift the holder out. r::-::J' 7. Removegenerator. ~,A Separatethe B+ disconnectionpoint under the cover for this purpose. \. Unscrewthe left fastening screw. Undo right fa~tening screw by approx. three turns. ,,~:=====;:;::~~ Loosen the threaded bushing in the alternator '~~.. .~ --: ::::="-~:::::;";;:i:~:::~~."...'.. -~. .".""~ -l swivel arm with a light tap on the screw head. Then unscrewthe fastening screw. Lift the generator out. 061_99 9. Removethe compressor. Disconnectthe electrical connectionon the compressor. Lift the compressor out of the engine compart- ment and lay it aside with the leads still connected. Protect the body from damage with a cover. 27 27 19 Removing and installing bracket for generator -GT3 27 -13 Printed in Germany -29, 1999 9962711 ~---:-