28 04 19 Removing and installing ignition switch · 1. Disconnectbatterygroundcable.

911 Carrera (996) Ignition 28 04 19 Removing and installing ignition switch Removal 1. Disconnectbatterygroundcable. 2. Turn ignition key to position 0 and remove. 3. Removeair duct (A). The air duct is plugged in. 291-97 29O_97 4. Pull connecting plug off ignition switch. 483-97 5. Remove screw locking paint in the threaded Installation bores of the two fastening screws (short arrows). 1. Move ignition switch to position a (same Slightly loosen both fastening screws position as lock barrel), (short arrows) using special tool 9631 (Figure 483-97) and pull the ignition switch 2. Insert ignition switch into the housing. out of the housing (direction arrow). Tightenfastening screws using special tool 9263 (Figure483-97) and subsequently secure with screw locking paint. 28 04 19 Removing and installing ignition switch 28-1 Printed in Germany -5, 1997 996281