Installing fuel pump · No. Procedure Instructions

Installing fuel pump No. Procedure Instructions 1 Positioning the fuel pump Put on a petrol-resistantglove. Positionthe fuel pump. The edge of the fuel pump housing should be approximately aligned with the installationposition markings of the fuel tank sender unit. Place fuel pump on the tank bottom/ bayonet lock in this position and turn the fuel pump clockwise as far as it will go. Then check proper seating of the fuel pump by pulling it up. 2 Installing sucking Guide right sucking jet pump into the fuel tank recess. jet pumps Insert upper part of the sucking jet pump straight into the take-upbores of the fuel pump (arrow 1). When slight pressure is applied, it must be possible to hear the sucking jet pump engage in plug-incoupling. Then pull slightlyto ensure that the connection is properly locked. Positionfuel line (arrow 2) in a straight line. When slight pressure is applied, it must be possible to hear the fuel line engage. Pull slightly to ensure that the connection is properly locked. Install left sucking jet pump. Installationis performed the same way as for the right sucking jet pump. The only difference is the insertion direction of the fuel line. The lines are inserted vertically in this case (arrow4). 3 Installingtank Fit sealing ring. senderunit Carefullyguide tank sender unit into the fuel tank. Note Do not bend the linkage. 4 Fitting fuel lines and Positionfuel lines in a straight line. When slight pressure electrical plug connection is applied, it must be possible to hear the fuel lines engage. Pull slightlyto ensure that the connection is properly locked. Push on the electrical plug connection. 20 -108 2066 19 Removing and installing fuel pump 99620101 Printed in Germany. 15,1998