20 78 19 Removing and installing pedal encoder · 1. Pull off the centre air duct (A) in the driver's

911 Carrera 4 (996) Fuel supply, control 20 78 19 Removing and installing pedal encoder Removal 1. Pull off the centre air duct (A) in the driver's footwell. ~\ i:::::::;;;;iiiii:i~;;;:J:\.~_\ 382_98 2. Undo two hexagon nuts (a/t 10 mm) on 3. Disengageelectrical plug connectionon the the pedal encoder. bracket. To do this, turn the plug connection counter-clockwisein the bracket and take it off. Disconnectplug connection. 4. Pull pedal encoder out of the stud, disengage the cable from the cable disc and remove the pedal encoder in downwarddirection. Installation 1. Engage cable in the cable disc, insert the pedal encoder in the stud and fasten the pedal encoder with two hexagon nuts. Tighteningtorque 8 -9 Nm (6.0 -6.5 ftlb). 2. Position electrical plug connection in the bracket and turn it clockwise until the plug connection engages. 207819 Removing and installing pedal encoder 20-111 Printed in Germany. 15, 1998 99620111