996 Carrera Group 3 Transmission, Manual / PAGE 21
Clutch, actuation 911 Carrera (996) · Assembly instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Clutch, actuation 911 Carrera (996)
Assembly instructions
Removal Installation
1. Removemanualtransmission.Referto Group3 1. Fit centring mandrel (special tool 9102) with
-Manual transmission, ServoNo. 3435 19. drive plate in the guide bearing (needle bush),
2. Fasten toothed segment (special tool 9538/1) 2. Fit thrust plate.
on the crankcase half (cylinder bank 1 -3) Alwaystighten pan-headscrews in several
with hexagon-headbolt M12 x 50. stages and in diametricallyopposite sequence.
Tighteningtorque: 23 Nm (17 ftlb.)
3. Removecentring mandrel.
\'
.-",
\-,
n
607_97
Detach thrust plate.
Note
In order to avoid deformation of the thrust
plate housing, always loosen screws in
several stages and in diametrically
opposite sequence.
4. Removethrust plate and drive plate.
30 -2 30 50 19 Removing and installing clutch
996301 Printed in Germany -13, 1998
~3.
This is a source reference. Confirm exact model applicability in the original material.