Removing and installing closure cap for selector mechanism · 1. Removetransmission

911 Carrera (996) Manual transmission actuation, housing Removing and installing closure cap for selector mechanism Removal 1. Removetransmission (refer to Service No. 34 35 19). 2. Shift gear lever to neutral, unscrewfastening screw "A" and remove snap ring "B". 484_98 Installation 1. Insertthe closurecap and snapring into the holein the housing. A -Fastening screw 076_98 B -Snap ring 2. Using special tool P375 press the snap ring C -Closure cap and closure cap down until the snap ring engagesinto its groove. 3. Drill a hole of 3.5 mm in the centre of the Note closure cap (coat drill with thick grease in order to prevent drilling chips from falling Ensure that the snap ring is perfectly secure, into the transmission), screw in sheetmetal screw (4.8 x 25) with a large washer and 3. Tightenthe fasteningscrewfor the wheel lever out the closure cap using two bearinghousingto 25 Nm (19 ftlb.). screwdrivers. 4. Installthe transmission. 3449 19 Removing and installing closure cap for selector mechanism 34 -21 Printed in Germany -18, 1998 9963419