Each time the shift cables are removed from the · transmission lever, the retaining clips of the shift

Note Each time the shift cables are removed from the transmission lever, the retaining clips of the shift cable end pieces must be replaced. 1. Cleanteeth of the drive shaft and grease with a thin coat of Olista Longtime 3 EP (availableas spare part). 2. Ensure perfect seating of dowel sleeves in crankcase. 3. Move in transmission so far that the clutch sla- ve cylinder can be fitted. Tighteningtorque for hexagon-headbolts 23 Nm (17 ftlb.). * Multiple-toothnut ** Hexagon nut 4. Carefullymove transmission in further and fa- sten to engine. (as of 4.9.97: M12 x 50 hexagon-headbolt) Tightening torques: 1 Cross member to carrier 2, -,. 8 side member (MID) = 65 Nm (48 ftlb.: " ! Stabiliser to rear axle cross member side part (M8) = 23 Nm (17 ftlb.) 3 ;... 7~ Drive shaft to transmission # I i flange (M10) = 81 Nm (60 ftlb.) ~ i -I: Clutch slave cylinder to transmission (M8) = 23 Nm (17 ftlb.) 4~ Transmissionsupport to 151; 5 body (MID) = 65 Nm (48 ftlb.) Transmissionsupport/transmission 97-130 carrier to transmissionbearing (M10) = 65 Nm (48 ftlb.) Transmissionsupport to body (MID) = 65 Nm {48 ftlb.: 34 -6 34 35 19 Removing and installing transmission G 96 996341 Printed in Germany -4, 1997 r--.-~~