4. Insert B+ wire into the slot of the rubber slee- Note · ve and press sleeve into the body opening.

4. Insert B+ wire into the slot of the rubber slee- Note ve and press sleeve into the body opening. The shift and selector cables are routed under- neaththe console. 8. Fastenshiftand selectorcableson the shift console: Fit support bracket sleeves (5) in the correct position. It must be possible to hear and feel them engage. Engage shift and selector cables in the open adjusters (3) and close the adjusters (see enlargedview). The locking sleeves must move to the end position automatically. 1 -B+ wire 551_97 2 -Rubber sleeve 3 -Shift and selector cables 5. Fasten shift and selector cables on support bracket (AjB) and on transmission lever (1/2). / ~~ ('9""l' ~, - '-- ~ '.. . 1 -Selector cable (blue) 603-1-96 2 -Shift cable (black) 1 -Selector cable (blue) 554_97 3 -Adjuster open 2 -Shift cable (black) 4 -Adjuster closed 5 -Support bracket 6. Installtransmissionsupportand cross member. 9. Removespecialtool 9619 and shiftthrough all gearsas a test. 7. Installparkingbrakeconsole. 10. Clipin shiftconsolecover. 34 -16 341219 Removing and installing shift and selector cables 996347 Printed in Germany -4, 1997 ~.-