996 Carrera Group 3 Transmission, Manual / PAGE 62
Installation · 1. Push assembly sleeve 9255 onto the toothing 3. Drive in sealing ring with special tool 9628 as
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Manual transmission -Gears, shafts, into gearsh.
Installation
1. Push assembly sleeve 9255 onto the toothing 3. Drive in sealing ring with special tool 9628 as
of the input shaft. far as the mounting face.
-
~,
~
~,
141.97 142.97
2. Fill the space between the dust and sealing 4. Install guide tube for release bearing.
lips on the sealing ring with grease (e.g. Liqui Always renew fastening screws and tighten
Moly). with 24 Nm (18 ftlb.)
5. Fit release lever with release bearing.
6. Clean teeth of the input shaft and grease with
a thin coat of Olista Longtime 3 EP (available
as spare part).
35 50 19 Removing and installing sealing ring for input shaft 35 -3
Printed in Germany, 1997 996351
'~II
This is a source reference. Confirm exact model applicability in the original material.