Removing and installing cover for final drive · Removal Installation

Removing and installing cover for final drive Removal Installation 1. Draintransmissionoil. Tightening torques: 2. Removedrive shaft at the transmission and Cover for final drive protect the shaft against damage (use scrap to transmission (M8) = 25 Nm (18 ftlb.) pieces of hose with a diameter of 30 mm). Drive shaft to transmission 3. Remove halfshaftflange (see Pages 39 -5 flange (MID) = 81 (60 ftlb.) and 39 -9). Oil filler and oil drain 4. Unclip hydraulic line for clutch slave cylinder. plugs (M22) = 30 Nm (22 ftlb.: 5. Unscrewhexagon-headbolts for cover and press off cover on alternate sides. 1. Fit sealing ring untwisted. 2. Coat sealing ring with transmission oil and fit cover. Use special tool 9321 to aid assembly. ( ~ 13~V -lni -- 129.97 39 -2 39 20 19 Removing and installing cover for final drive 996391 Printed in Germany, 1997