996 Carrera Group 3 Transmission, Manual / PAGE 67
Sealing ring for limited-slip differential --Removing and installing halfshaft flange · Note
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Final drive -Differential, differential lock
Sealing ring for limited-slip differential --Removing and installing halfshaft flange
Note Installation
The sealing rings can also be replaced with the 1. Fill the space between the dust and sealing
transmission installed. lips with grease (e.g. Liqui -Moly) and drive in
the sealing ring up to the mountingface using
Removal special tool 9252.
1. Unscrewfasteningscrewfor halfshaftflange
and pull out halfshaftflange.
/
;=(~
I
r
114.97
113 -97 2. Tighten the fastening screw for the halfshaft
flange with 44 Nm (33 ftlb.).
2. Lever out sealing ring using a suitable tool
39 22 19 Sealing ring for limited-slip differential 39 -5
Printed in Germany, 1997 996391
~.
This is a source reference. Confirm exact model applicability in the original material.