Body equipment, exterior 9116 · Soft top cover connection/rear window on Soft top cover connection

Body equipment, exterior 9116 Soft top cover connection/rear window on Soft top cover connection/rear window on corner bow tensioning bow The soft top material (1) runs through the The lining (1) is pulled at the rear end over corner bow (2) up to the rear window (3). the additional sealing (3) inserted in the ten- The front lining (4) with the sewn-in piping sioning bow (2) and secured in the groove and cardboard strip (5) is tucked into the with the piping (4). The sealing of the ten- respective fixture of the corner bow and co v- sioning bow (5) is inserted into the lower ers the corner bow. groove of the tensioning bow and seals The rear lining (6) runs over the corner bow against the soft top compartment cover. and is inserted with its flat section (7) be- A plastic strip (7) is sewn onto the rear lining tween the rear window and the window (6), which is attached to the section of the frame (9). tensioning bow. The rear lining is inserted The lining is connected to the rear window with its flat section (12) between the rear win- and inside window frame with a total of 32 dow (9) and the window frame (10). clips (6). The rear window sealing (10) runs The lining is connected to the rear window along the outside between lining and rear and inside window frame with a total of 32 window. clips (8). The rear window sealing (11) runs along the outside between lining and rear window. 6_10_02 1 - Lining 2 - Tensioning bow 6_09_02 3 - Additional sealing 4 - Piping 1 - Lining 5 - Sealing, tensioning bow 2 - Corner bow 6 - Lining, rear 3 - Rear window 7 - Plastic strip 4 - Lining, front 8 - Clip 5 - Cardboard strip, lining 9 - Rear window 6 - Clip 10 - Window frame 7 - Flat section 11 - Rear window sealing 8 - Clip 12 - Flat section 9 - Window frame 10 - Rear window sealing 6 - 4 Service Information 2002