996 Carrera Group 3 Transmission, Manual / PAGE 83
Final drive -Differential, differential lock 911 Carrera 4 (996) · Tightening torques:
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Final drive -Differential, differential lock 911 Carrera 4 (996)
Tightening torques:
Studs on front-axle cross
member (M8) = 20 Nm (15 ftlb.)
Front transmission support
on transmission (MID) = 65 Nm (48 ftlb.)
Front transmission support
on front-axle
cross member (MID) = 65 Nm (48 ftlb.)
Rear transmission support
on body (MID) = 65 Nm (48 ftlb.)
Rear transmission support
on transmission mount (MlOx 90) = 65 Nm(48 ftlb.)
Drive shafts on front-
axle final drive (M8) = 39 Nm (29 ftlb.)
Diagonalbraces on body
and front-axle cross
member (M12) = 100 Nm (74 ftlb.)
Tankstrap on
body (M8 x 40) = 23 Nm (17 ftlb.)
Pipe holder on transmission
support (M6) = 7 Nm (5.0 fttb.)
8
39 -104 39 88 19 Removing and installing front final drive
C4S39101 Printed in Germany -14, 1998
This is a source reference. Confirm exact model applicability in the original material.