6. Removesealing ring. Installation · To do this, use an angle drill to make a 1.

6. Removesealing ring. Installation To do this, use an angle drill to make a 1. Removedrilling chips in the transmissionneck. 3.5 mm dia. hole in the lowest non-rubberisedsurface "B". 2. Degreasethe pinion shaft journal (splinesand Screw in a large sheetmetal screw (4.8 x 25) thread), halfshaftflange splines and thread of with a large washer and lever out the sealing the collar nut with cleaning agent (e.g. Loctite ring with two screwdrivers. quick cleaner). 3. Fill the space between the dust and sealing lips on the sealing ring with grease (e.g. " toLiquithe-Moly)mountingandfacedriveusingin thespecialsealingtoolring9639.up "~ B ~ >" J/ "" A -Sheetmetal screw 4.8 x 25 273_98 '" B -3.5 mm bore /" """ '"" 1\ II II 274_98 4. Coat halfshaftflange splineswith screw locking lacquer (e.g. Loctite 243 or Omnifit 50 M) and fit the flange. 5. Coat contact surface and thread of the collar nut with screw locking lacquer (as in step 4). 39 82 19 Removing and installing sealing ring for cardan flange 39 -111 Printed in Germany -14, 1998 C4S39109