Removing and installing support for final drive · 1. Removefinal drive

Removing and installing support for final drive Removal 1. Removefinal drive (refer to Servo No. 39 88 19). 2. Unscrewfastening screws and remove support. Installation 1. Fit supportin the correctposition (angledsidefacingupwards). A -Tabs 48O_98 2. Tighten fastening screws in two stages. 1st stage: Screw both screws to 5 Nm (3.7 ftlb.). 2nd stage: Tighten both screws to 65 Nm (48 ftlb.). 3. Install final drive. 481_98 Note At the beginning of the series, supports with tabs were installed. These supports must be fitted with the tabs facing downwards. 39 -128 39 62 19 Removing and installing support for final drive C4s39127 Printed in Germany -18, 1998