Refitting the transmission · Grease teeth of the drive shaft with a very thin

911 Carrera (996) Manual transmission -Actuation, ass. housing Refitting the transmission Note Grease teeth of the drive shaft with a very thin coat of Olista Longtime 3 EP (only as protection against corrosion). 1. Insert release lever into the release bearing and fix in installation position with suitable ad- 7 hesive tape. 1 -Hexagon-head bolt 11O_99 2 -Support 3 -Bearing cover 4 -Needle-roller bearing with assemblybore 5 -Sealing ring 6 -Clutch control shaft 7 -Release lever 4. Removeadhesivetape through the assembly opening in the releasefork. 114_99 5. Fit needle-rollerbearing, bearing cover and support. Tighten fastening screw to 2. Fit the transmission onto the engine. 10 Nm (7.5 ftlb.). 3. Fit releaselever shaftwith sealingrings. 6. Fit air flanges. 34 35 27 Removing and refitting the transmission -GT3 34 -203 Printed in Germany -25, 1999 GT334201