Removing and installing closure cap for selector force mechanism · 1. Removeengine-transmissionunit.

911 Carrera (996) Manual transmission -Actuation, ass. housing Removing and installing closure cap for selector force mechanism Removal 1. Removeengine-transmissionunit. 2. Shift transmission to neutral, unscrew fastening screw "A"and remove snap ring "B". 484_98 Installation 1. Insert closure cap and snap ring into the housing bore. A -Fastening screw q76_98 B -Snap ring 2. Use special tool P375 to push the snap C -Closure cap ring and closure cap down until the snap ring engagesinto the groove. 3. Bore a 3.5 mm large hole into the centre of Note the closure cap (coat drill with viscous grease to prevent drilling chips from falling into the Ensure perfect seating of the snap ring. transmission). Screw in a sheetmetal screw (4.8 x 25) with a large washer and lever out 3. Tighten the fastening screw for the wheel the closure cap using two screwdrivers. bearing housingto 25 Nm (19 ftlb.). 4. Installengine-transmissionunit. 3449 19 Removing and installing closure cap for selector force mechanism -GT3 34 -207 Printed in Germany -25, 1999 GT334205