3. Fix shift rod for 5th and 6th gears by shifting 2. Shift into a gear and fit all gear wheels. · into a gear and pull off

911 Carrera (996) Manual transmission -Actuation, ass. housing 3. Fix shift rod for 5th and 6th gears by shifting 2. Shift into a gear and fit all gear wheels. into a gear and pull off the needle bearing inner race. 3. Move the shift rods for 5th/6th gear and reverse gear to installationposition and adjust the shift forks. 4. Adjust shift fork for reverse gear. To do this, fix the shift rod with special tool 9650. Then adjust the fork so that just enough play remains at the shift collar when reverse gear is engaged. The synchronising ring must be free to rotate in idle position. \\"L, A -Arms of puller 9284 147_99 B -Pressure piece 9656 Assembly 1. Check synchronisingrings by pushingthem J.0 onto the gear wheels and measuringthe gap J "A" with a feeler gauge. "",(( ,.,~Dol]) A -Special tool 9650 315_99Installation dimension (new) lmin. 0.9 mm =i B -M6xll 0 screwWear limit =10.6...0.7 mm \'\ \\\ 313_99 34 35 37 Disassembling and assembling transmission -GT3 34 -215 Printed in Germany -29, 1999 GT334209