996 Carrera Group 3 Transmission, Manual / PAGE 153
No. Designation Qty. Removal Installation · 15 Shift collar (with asymmetri- 1 Sy
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Note:
No. Designation Qty. Removal Installation
15 Shift collar (with asymmetri- 1 Synchronisingcomponents Dotting marks centred
cally pointed teeth) could pop out with respect to the driver
dogs.
Recognitiongroove must
face to the loose gear-
wheel for 3rd gear. Put
on together with guide
sleeve
16 Driver dogs 3 Insert in correct position;
curved side faces the
shift collar
17 Ball 3
18 Spring 3
19 Synchronising ring 1 Mark for refitting Check for wear; fit in the
correct position with the
same gear wheel (nubs
facing the driver dogs)
20 Loose gearwheel(3rd gear) 1 Replace only in pairs
21 Needle-rollerassembly 1 Mark for refitting Fit with the same gear
wheel
22 Input shaft
35 40 37 Disassembling and assembling input shaft -GT3 35 -208
GT335205 Printed in Germany -29, 1999
This is a source reference. Confirm exact model applicability in the original material.