9 Electrical system 911 Carrera/911 Carrera 4 · Seat and mirror memory via remote control Storing seat position

911 Electrical system 9 9 Electrical system 911 Carrera/911 Carrera 4 Seat and mirror memory via remote control Storing seat position 1. Using the key of your choice switch on the ignition. 2. Set the seat and mirror to the positions you require. If, when reversing, the front passenger-side outside mirror is to be used as a parking aid, then the reverse gear must be engaged when storing the seat position. 3. Hold down memory button "M" and addi- tionally press button (next to memory button). The individual setting is now assigned to this remote control and button . Retrieving seat position Unlock car or boot using remote control. A seat position assigned to a remote control B21 008 can also be retrieved with button, if the respective key has unlocked the vehicle orIndividual seat and exterior mirror settings switched on the ignition.for the driver can be saved for subsequent retrieval. If no seat position is assigned to a remoteThe remote control detects which key is be- control, button has not function.ing used at any given time and sends this data to the seat memory control module. NoteThis then initiates an automatic adjustment of both the seat and the outside rear-view Automatic seat adjustment can be aborted mirror. at any time by pressing the central locking If a locked car is opened by means of the button, or any memory or seat adjustment radio remote control, the seat and the out- button. side rear-view mirror move to the positions stored for this particular key. Deleting stored seat position 4 keys, which are colour coded so one can tell them apart, can be programmed for 1. Using the key of your choice switch on each car. the ignition. 2. Press and hold button and personal button 2 simultaneously for at least 5 seconds. 2002 Service Information 9 - 1