The door lock should be installed only when the actuating · lever is in basic position!

911 Carrera (996) Body -general The door lock should be installed only when the actuating lever is in basic position! Danger of injury if side airbag units in the door are triggered while ignition key is not removed! .Always remove ignition key during body work, and do not commence adjustment work until a waiting period of at least 1 minute has elapsed! The ground strap of the battery must be disconnected during work on the airbag system and alignment bench work within the framework of body repair! There is a danger of injury if fingers or hands are trapped by the door window when the comfort function is triggered: lower and raise door window! When carrying out assembly work in the area of the con- nection piece (Item 3), the bottom part of the door handle (Item 4) and the door lock (Item 5), the fuse No.1 in row D must be removed! A Caution! Damage to plug connection lugs during door removal! Damage to lugs when pulling the plug connection out of the A-pillar! The locking element at the bottom part of the plug con- nection must be pulled out before the plug connection is disconnected! Damage to the bowden cable when removing door trim panel! Damage by bending the bowden cable at the hook! Pull the hook out of the end piece only after installation in the inner door release! 5 Safety instructions for body repair 5-1 page 3 Printed in Germany -42, 2000 c5xxxxxl ..